Automotive News, Car Modifications, Car Repair and Maintenance, and Anything Related To Cars
I found few great pictures of the limited edition of the Proton Persona from e-kereta.com. It is called Proton Persona Envy. I guess the specs will be more or less the same as the standard version where it’s powered by the 1.6 liter normally aspirated Campro engine.
I’m not sure if the Envy is street legal though with all the tinted glasses and the darkened taillight.
I wish Proton will develop a turbocharged engine for future Proton cars. I might consider to buy Proton car again 
Previous post: Citroen C-Cactus Concept Review
Next post: Novitec Rosso’s 2007 Ferrari 599 GTB Fiorano
Mazda has unveiled the Mazda Shinari four-door concept at a special press conference near Milan in Italy. According to Mazda Motor ...
Mercedes-Benz has released the official details and images of the new 2012 Mercedes-Benz CLS which will make its public debut ...
Infiniti has released the details of its Infiniti Performance Line (IPL), a specialty-performance vehicle collection and the first production vehicle ...
Kia Motors America (KMA) has officially unveiled the 2011 Kia Optima sedan (Magentis in Europe and K5 in Korea) at ...
Citroën has officially unveiled the SURVOLT Concept at the 2010 Geneva Motor Show. Citroën took the essence of the Citroën’s ...
Lexus has finally unveiled the Lexus LFA at the 2009 Tokyo Motor Show. According to Chief Engineer Haruhiko Tanahashi, the ...
Ferrari has finally unveiled the mid-rear engine 458 Italia, the replacement model for the Ferrari F430. The 458 figure represents ...
{ 16 comments… read them below or add one }
Man looks like a cross between a mazda 3 and a Gen 2.
“I wish Proton will develop a turbocharged engine for future Proton cars. I might consider to buy Proton car again”
Abaang, right now Turbo isn’t the issue. The crash safety, tensile strength, and QC need to be worked on. Only after the car is sturdy and has a strong chassis, can we think about turbocharging/ thowing in variable valve timing for the engine /V8 etc.
Just my 2 pennies worth.
You are right there Felipe. I think they are working on the QC now. The materials, accessories and installation on the Persona is a bit better than Gen 2 now. A bit la..At least they are on the right track…I bet if they come up with turbocharged engine…they’ll improve on the structure itself..If they don’t, the R&D department should just “Go Fly Kite”..hahaha
I think Proton cars are good in there category and price compare to other cars I tried the Hyundai cars befor and Proton cars quality and safty is to much beter the only test made for Proton cars in Europe was carried out at 2002 for the first Impian car to Europe and It got around 4 stars out of 5 for the first test and passed the test needed to go threw europe market and you can notice that they did not try to test it again after any improve from prton side to increse it’s safety specs. although they make this tests periodicaly for other manufacurer.
We should be aproud that My could produce a complete car it self.
I ‘m Egyption and I had visited My. I own Proton waja and a proud to have it from proton
i think proton have do a good job now..proton car is good and it seems going to be better…proton do a lot of improvement to bring out new sophisticated technology or design for a new car..i believe one day proton will be one of the top manufacturing car in the world..
could u please tell me how much does this persona envy really cost actually???
thanks
yeah….. how much does cost really..??? i thought of buying one. nice sporty looks
sorry folks..i don’t know the price…i just bought proton persona for my wife…if it’s mine maybe i’ll modified it to be like the envy or even better…still loyal to my proton putra ma
Honestly i just want to say congratulations for the revolution of proton persona. It’s look sporty and confortable…but i suggest this proton persona envy need to add something that can make it more power full and more sporty like the other brand like BMW,TOYOTA,NISSAN and MER’S..
Hope that this era of revolution can approved the way to make proton go one step closer to success….
THANKS.
buy PERSONA and then do the modification.
most important is.. MONEY
—————————————————–
http://www.thepersonaclub.com/forum
I have tried persona recently, 1st gear perform well, but the 2nd – 3rd gear at 2000~3000 rpm shown low perfomance. The sound proof not bad.
Needed to test up the IAFM and CPS model, cause it shown the torque had imrpoved.
Honestly i just want to buy a persona, but i suggest this proton persona need to upgrade to 1.8cps
I Just Got My New Proton Persona B-Line Manual 1.6. Well It is a nice car looks sporty and more comfortable. and I also suggest this proton persona should need to upgrade to 1.8CPS.
well..i’m using persona 1.6 m_line wif Iafm.i not that much satisfy with it.body is really nice.but performence a bit low.such as pick up,engine sounds.over all it ok 4 the price Rm50,300.
I own a Persona M-Line. Acutally, car is ok except for these small issues.
1. Don’t like the flapping sound from the IAFM. Anyone can share how to reduce this sound?
2. Petrol consumption seems high. A full tank can only last me about 5 days and my average travelling per day is about 40km/day.
3. Body paint is thin and britlle. Paint chips off easily.
4. Pick up is a bit slow especially when in 2nd and 3rd gear.
Other than that, it is ok. Like the car. Any comments?
Looks like the car was renamed to Persona SE. I own one. About petrol consumption, after driving almost 4000km, I can do 200km after using half tank (there’s lots of air still in the tank though). My body paint’s still fine. I tested the acceleration when going past a toll revving the engine high, and it’s like what you said. Being the heaviest Persona using the same 110hp engine doesn’t help.
i prefer waja than persona..but nowadays the price of waja is so expensive..but my choice is persona because i find that Persona can be modified just what i hv on my mind..prefer white colour..then few add up & colour paint.especially the rims..but i really luv Waja..